AIR FORCE Air Mat OV10 Electric Air Pump

  • Sale
  • Regular price $120.00



Detail
[FEATURES]
  • Inflator for rapid inflation and deflation
  • Easy to transport
  • Complete with adapters for the most commonly available valves.
  • Power supply : 220V 60Hz (Needed transformer for other electricity)
  • Maximum power: 1000 W
  • Maximum pressure: 250/3.6 mbar/psi
  • Maximum flow rate: 1700 l/min
  • Weight: 1,700kg
  • Dimensions: 150 x 60 x170 mm
  • The inflator is fitted with a thermal cut-out; If it intervenes due to overheating, it will automatically reset itself after about 20/40 minutes.

[WARNINGS]
  • Before inserting the plug into the main socket, check that the voltage corresponds with that written on the plate.
  • It is forbidden to use the device in humid environments or close to water.
  • Never touch the power cable with wet hands (risk of electric shock)
  • The electrical power cable cannot be replaced, if the cable is damaged the product cannot be used.
  • Keep the product out of the reach of children.
  • Do not leave the inflator running unattended.
  • Do not use the inflator with adapters other than those supplied with the product as they could damage the device.
  • Take care not to allow sand or small stones to get into the inflator.
  • Repairs must only be undertaken by an authorized customer technical service.
  • Long periods of use can cause overheating and damage the product. Do not use for more than 30 minutes continuously.

[INFLATION OPERATION]
  • From the black universal adaptor, select the reducer that engages and opens the valve of the rubber.
  • Insert the selected adaptor on the grey fitting.
  • Fit the black adapter on to the inflation side of the inflator. (OUT)
  • Check that the ON/OFF switch is set to (O).
  • Plug the inflator into the main supply and turn the switch to the (I) position, the inflation will start.
  • The inflator is self-limited to a maximum pressure of 250 mbar. When the maximum pressure is reached, switch off the inflator immediately to avoid overheating the motor.

[DEFLATION OPERATION]
  • From the black universal adaptor, select the reducer that engages and opens the valve of the rubber.
  • Insert the selected adaptor on the grey fitting.
  • Fit the black adapter on to the inflation side of the inflator. (IN)
  • Check that the ON/OFF switch is set to (O).
  • Plug the inflator into the main supply and turn the switch to the (I) position, the deflation will start.
  • When deflation is complete, switch off the indicator immediately to avoid overheating the motor.